The Ductile Cast iron Manhole Covers and frames and gully and grate which are produced by our company with below advantages:

----Security, prevent the cover being stolen

----No noise.

----High load-bearing

----corrosion resistance

----Safety

1. According to BS EN124:1994/BS 497-1:1976

2. The material grade: GGG500/7,

3.Coating: black bitumen、epoxy powder.

4:Ductile iron manhole covers and gully grates are divided into the following classes:

A15, B125, C250, D400, E600 and F900.

1: (class A15 minimum) Test 1.5 metric ton

Areas which can only be used by pedestrians and pedal cyclists.

2: (class B125 minimum) Test 12.5 metric ton

Footways, pedestrian areas and comparable areas, car parks or car parking decks.

3: (class C250 minimum) Test 25 metric ton

For gully tops installed in the area kerbside channels of roads which when measured from the kerb edge, extend a maximum of 0.5m into the carriageway and a maximum of 0.2m into the footway.

4: (class D400 minimum) Test 40 metric ton

Carriageway of roads (including pedestrian street), hard shoulders and parking areas, for all types of road vehicles.

5: (class E600 minimum) Test 60 metric ton

Areas imposing particularly high wheel loads, e.g. docks, aircraft pavements.

6: (class F900 minimum) Test 90 metric ton

Areas imposing particularly high wheel loads, e.g. docks, aircraft pavements.

Square/ Round/Rectangle Ductile Iron Manhole Cover and Frame

-----Heavy Duty Square and Rectangular Manhole cover and frame.

-----Medium Duty Square and Rectangular manhole cover and frame.

-----Light Duty Square and Rectangular manhole cover and frame.

-----Circular cover with circular frame

-----Circular cover with square frame

-----Channel grating, double layer cover and frame

6:Manhole covers production process

7:Capacity load testing and delivery